Husband and wife, father and son, mother and daughter — in a columbarium all of these are called shared niches. But in practice a shared interment follows four quite different arrangements, differing in price space and how easily they can be altered later. Choose wrong and you discover the crowding only at the moment of installation. Choose right and it fits first time. This piece takes the four apart.

The first threshold for a shared niche is clear width, not outer width.
Two standard urns side by side, at 200 mm diameter, plus a 40 mm centre gap and 20 mm handling clearance on each side, need a clear width of 460 mm. Most single niches have an internal clear width of only 380–420 mm.
So the answer to "can this hold two" is on the internal drawing, not in the sales pitch. Measuring is simple: bring a tape, open the niche door, measure the smallest distance between the two uprights, then measure the clear width of the door opening — the opening is usually 20–40 mm narrower than the cavity the urn goes in at an angle, and what actually passes is the diagonal of the opening.
A hard requirement of shared interment is that the two urns are identical or close in size. The reason is not looks. It is load.
In the stacked arrangement, where the upper urn sits on the lid of the lower, the lower lid must be flat and able to bear load. If one urn is bellied and the other cylindrical, the upper one will not sit steadily and will drift to one side over the years Nobody is standing by to steady it; one slip means a crack.
Practical advice: for a shared pair keep the height difference within 20 mm and the diameter difference within 15 mm. If you cannot choose side by side without stacking.
Two niches on the same tier adjacent, with no upright between them or a removable one. This is the most stable arrangement: each urn rests on its own base and neither bears the other's load.
The advantages are clear load paths and the ability to relocate one later without affecting the other. The drawback is the highest demand on clear width: 460 mm is the floor On price it usually runs 10–20% less than two separate niches, because one upright and one door are saved.
The common solution when clear width is insufficient: fit an intermediate shelf and stand the upper urn on it.
In a stacked shared niche the load lands on the shelf's two bearing points, not on the lower urn's lid. The shelf must be metal or stone at least 5 mm thick, bearing at least 20 mm onto the uprights at each end.
Watch the clear height. Stacking needs 480–520 mm (200–230 per urn, plus 10 for the shelf and the gap), while most niches have a single-tier clear height of 300–350 mm. So stacking generally consumes two standard tiers — which means paying for two niches to get a space that looks like one. Do that arithmetic before agreeing.

Some niches are built to 550 mm depth which makes front-and-back placement possible.
The method: one urn at the front near the door, one at the back against the panel with a removable divider between. The advantage is saving face width, so the number of positions on a tier does not drop. The drawback is that the rear urn is extremely hard to handle — the front one must come out before you can reach it.
My advice: use this arrangement only on the understanding that the rear urn will never move again. If the two arrive years apart and the second will require opening the door again, front-to-back turns the second interment into a small relocation.
Whichever arrangement you use, a shared niche should have twin name plates: two plates side by side on the door, or two lines engraved on one plate.
The reason is concrete. A shared niche has a single door; engrave only one name and the other person visually does not exist. Every visit the family has to explain at the door that there is someone else inside Twin plates solve exactly that.
Name plates follow the usual 60 × 30 mm; with two lines, character height drops from 8 mm to 6 mm, which still gives legibility at two metres.
The first is management fees. Whether a shared niche is charged per niche or per urn varies by hall. Charged per niche, the second interment usually attracts an admission fee; charged per urn, the annual fee doubles. Ask before buying.
The second is later separation. To relocate one of the two afterwards requires the consent of all heirs of the other. This is often a single line of small print in the contract and it surfaces only when something goes wrong.
The third is the tablet. Whether a shared niche gets one tablet or two directly affects registration in the ancestral tablet area. Most halls work on one tablet per niche, so a shared niche still receives a single tablet number.
Q: Must a couple share one niche?
A: Not necessarily. Two adjacent separate niches work equally well and are easier to alter later. The value of a shared niche is opening one door, not sharing one box.
Q: The two interments are years apart. Will opening the door again disturb the first?
A: With side-by-side, essentially not — only the offerings in front need moving. With stacking or front-to-back, the first one's shelf or access route is affected, and staff must be present.
Q: Can a shared niche take three?
A: Technically yes (three-tier stacking or a deepened cavity), but clear height and load capacity both become tight, and admitting the third requires moving the first two. In practice, for three or more, use a family module at 600 × 560 × 500; it is cheaper than cramming into a single niche.

A shared niche turns on three numbers: 460 mm clear width, 480–520 mm clear height, and a size difference between the two urns of no more than 20 mm. Of the four arrangements, side by side is the most stable, stacking saves the most width, front-to-back saves the most face width but is hardest to alter, and twin name plates are required in all three Match the numbers to the arrangements and a shared niche will not become a box that, once sealed, can never be touched again.