The least conspicuous object in a columbarium is the lock on the door. It is opened a few times a year nobody ever inspects it — until one day the key will not turn, or a key is lost and needs replacing. And then everyone discovers that it cannot be replaced.

This is not an occasional problem. The lock is the only piece of hardware in a niche that is consumed in the dark. Its specification, its batch, its supplier — almost nobody records them. By the time you need them, ten years have gone by.
First, the lock specification was never recorded. A lock core has three parameters: diameter, core length and number of pin chambers. Common diameters are 16 or 18 mm, core lengths 20–30 mm, with five or six pin chambers. If those numbers were not logged at the time, ten years later you can only take a lock off and measure it — and taking a lock off requires opening the door first.
Second, the manufacturer changed suppliers. A lock is a small hardware item in a niche, and the purchase price difference is a few renminbi. Factories change suppliers all the time. The same door frame produced three years later may come with a different lock body that simply will not fit.
Third, the master key is lost. In a columbarium using a master-key system, the master key opens every door in the hall Once it is lost, either the whole set is replaced, or you accept that the locks in this hall are now effectively decorative. Security management in a columbarium is, in essence, master-key management.
Fourth, the door design exposes the specification. A number plate that slides to cover the lock hole is good design — but it also leaves the lock model fully visible, so anyone can see what kind of lock is fitted. Convenience and security conflict on this one small item.
The lock body material deserves a section of its own.
A brass core in a brass body will still work after ten years. A zinc alloy body is cheap, but in a damp environment it leaches and goes brittle, and after three to five years it starts to crack at the load-bearing points. Humidity in a columbarium is high year-round, which makes zinc alloy the least suitable material available.
The test is straightforward: look at the bolt. A brass bolt has rounded edges; zinc alloy looks whiter and brighter, and taps with a tinny sound. Even simpler: ask "is the body brass or zinc alloy". A manufacturer who answers without hedging usually knows what they are doing.
First, keep a key and lock register. One line per niche: niche number, lock type, core length, key number, and who holds the master key. Useless on an ordinary day. Priceless on the day something goes wrong.
Second, hold the master key under dual custody, stored separately. One person holding it is the same as nobody holding it. Two people storing separately is the only way to prevent a hall with no locks and no owner.
Third, apply graphite powder to the lock core once a year. Not machine oil — oil attracts dust and within two years the key will be stiff enough that it will not turn. Graphite is dry and does not collect dust.

First, one lock type for the whole hall. With several thousand doors in a columbarium, non-uniform locks mean you cannot stock spares. Uniformity means stocking one core type and one key blank.
Second, locks replaceable from outside. If a lock body can be changed without removing the door panel maintenance cost drops by an order of magnitude. This should be settled when the door panel is made: with a door frame profile 14.7 mm thick, 34 mm wide and 0.7 mm wall, the reserved lock hole position must accept any lock body of the same specification.
Third, the number plate should slide but lock in place. A movable number plate makes it easier to find a niche and to cover the lock hole. I would make it a sliding type with light damping, so it holds at the mid position instead of needing a hand to keep it there The details of a niche often live in exactly that kind of "one push" feel.
If every lock in the columbarium has to be replaced, management faces a practical problem: what happens to families' belongings during the changeover.
The standard procedure is advance notice, witnessed on site two-person operation, and a seal applied afterwards. A niche is not a safe, but every opening must be recorded. The management standard of a columbarium is held up by exactly these records.
Q: What if a key is lost?
Open with the master key first, then change the core. Do not attempt to pick or force it. One forced entry ruins the door panel, and a colour-matching problem on a door panel costs far more than a lock.
Q: Can we switch everything to electronic locks?
Yes, but two preconditions first: what happens in a power cut, and will elderly users be able to operate them. If an electronic lock in a columbarium has no mechanical backup, one power failure locks the entire hall.
Q: Is a more expensive lock more secure?
No. Security in a columbarium comes from management, not from the lock. A brass-core lock plus a register sheet is more useful than an imported lock plus an unattended key cabinet.

The lock on a columbarium niche is something that gets examined once every ten years. What it examines is not how good the lock is, but whether anyone ever wrote it down. Record the lock type, core length and key number on a sheet of paper, and in ten years you can get a key cut. Fail to record them, and the only option is to replace the lot.