"Later on, can we move my father next to my mother?"

This is the second most common question I am asked on site Families usually ask it with hesitation, as though raising relocation were itself disrespectful. In fact relocation is routine practice in a columbarium. It simply has limits — what can be moved, what it costs, and what can never be moved because nothing was reserved at the start. Once those three are clear, the anxiety goes away.
The first is transfer: moving from one niche to another, within the same hall the same tier, or across zones. This is a change of position, essentially a fresh interment.
The second is companion interment: placing two people into one niche cavity and pulling out the divider between them. This depends entirely on whether that cavity was built as a double in the first place.
The third is bone collection or bone washing: handling the remains after cremation. This belongs to funerary custom, varies enormously from place to place, and happens before the urn is sealed — it has little to do with the structure of the niche.
Nine out of ten times, what a family calls "moving" is one of the first two. And whether the first two are possible is answered in three places: the contract, the structure, and the records.
Where the niche is held as a right of use, changing niche normally requires the management office's consent and formal filing, and sometimes an administration fee. Where it is held as ownership, in theory it can be transferred or designated, but the management office process still applies, because the niche sits within a frame assembly — it is not a standalone house.
So the first question to ask is: can this niche's position be changed, and in which clause are the conditions and the fee written? If it is written, relocation is a formality. If it is not, relocation is a negotiation.
This is the hardest limit of all.
Whether companion interment is possible depends not on area but on that middle vertical panel. If the cavity was built as a single space of 600 mm or more with a removable divider in the middle, pulling it out is ten minutes' work. If it is two independent single cavities side by side, the middle consists of two vertical panels plus two frames, and it cannot be removed — removing it changes the load path of the entire column.
There is a second layer to the same question: load. Two urns in one cavity means the base shelf carries double the weight. A double-layer 30 mm shelf with a 1.5 mm wall load-bearing base handles two urns without issue. An economy carcass will start to sag from the middle once loaded.
I often say one thing to developers: companion interment is not a question of sentiment. It is a question of whether that cavity was reserved at the beginning. The cheapest thing to reserve in columbarium design is the divider and the base shelf.
On the day of relocation, the management office has to find the original niche, find the new one, then amend the records. If numbering is one plate per niche, the plate can move to cover the lock hole, and the system can be searched by column and tier — this takes half an hour. If numbering is just a serial number on an old sales sheet, someone has to search column by column.
The value of a niche numbering system is invisible in daily operation, but the moment there is a relocation, a companion interment or a change of title, it becomes efficiency itself.

Few people think of this in advance.
Door panels have colour batch numbers Make the same aluminium composite panel three years later and the colour difference is visible to the naked eye. Printed glass door panels are worse: UV ink hue shifts between batches. If the new niche sits in the same column and on the same face as the old one, the colour difference will be glaring.
Profiles get discontinued too. Top cap 60 × 58, load-bearing base 120 × 61, side panel post 63 × 37 — if the manufacturer retools, replacement parts can only be adapted. Half the cost of relocating a niche is paid in components.
So before relocating, it is worth doing one small thing: take one door panel off the old niche and keep it, or at minimum photograph it under a standard light source. When the time comes to match a new panel, that is the only colour reference you will have.
Choosing a date, informing the ancestors, arranging by family order — these are the family's own affair, and the management office simply cooperates. Only one thing needs flagging: niches from different families should not be mixed into the same removable cavity in one column. A removable divider is there for two or three generations of the same family, not for the neighbours.
Q: Does opening a niche for relocation affect the others?
Normal practice does not. Only one door is opened; adjacent carcasses are not touched. What I would flag is not doing it during peak periods — aisles are occupied when it is busy, and handling is more likely to cause knocks and damage.
Q: Does companion interment have to be completed on the day of the first interment?
No. A removable divider is designed precisely so that one person goes in first and the panel is pulled later. But tell the management office in advance, because the base shelf load has to be rechecked.
Q: Can a niche be relocated to a different hall?
Yes, but at the highest cost: the new hall's tier configuration, door panel batch and profile model all have to be matched again. For cross-hall relocation I usually advise the family to look at the actual new hall before deciding. A columbarium in a photograph and a columbarium you are standing in front of are two different things.

Whether a niche can be relocated is not answered by sentiment. It is answered by three words: contract, structure, records. The contract grants the right, the structure grants the room, the records grant the efficiency. Settle these three at the time of purchase and a future move becomes a formality rather than an ordeal.