You buy the urn, carry it to the hall and only then discover it will not go in. This happens dozens of times a year The usual cause is not an oversized urn but that nobody measured the cavity when the niche was chosen. The niche is already bought and there are only three routes: relocate, enlarge, or split. Their cost timing and reversibility are entirely different, and picking wrong once costs tens of thousands.

Many "it will not fit" cases are measured in the wrong place. A niche labelled 300 × 300 refers to the outside module; deduct the two panel thicknesses and the profiles and the clear width is often only 270–280 mm. That 20 mm is the difference between yes and no.
The second error is the door opening. The cavity may be large enough but the opening is not: the inner edge of the frame is 15–25 mm smaller than the cavity, so the urn has to go in at an angle, and what actually decides it is the diagonal of the opening. The third error is forgetting the base — urn plus base is 20 mm taller than the urn alone, and the base is usually discarded with the packaging when in fact it goes in too.
Re-measure clear width, clear height and the opening diagonal. If you are within 5 mm, a thinner base, removing the brocade box and using a soft pad will usually rescue it. Only a shortfall above 20 mm justifies the three routes below.
Relocating means exchanging the purchased niche for another of suitable size in the same hall — the only route that touches no structure.
Most halls charge a handling fee of 5%–10% of the niche price, with any price difference settled separately: moving to a more expensive niche means paying the difference, moving to a cheaper one usually means no refund. It takes three to fifteen working days, depending on availability and internal approvals. Once done, the original position returns to saleable stock and the matter is closed.
The precondition is that a larger niche exists. Ask before signing: does this hall have niches with a clear width of 320 mm or more, and how many are currently vacant? Without that answer, relocation is an empty promise.
Enlarging means knocking two adjacent niches into one. It sounds extravagant, but in older halls it is common: early columbaria were built small, while the urns families buy today keep getting bigger.
Three hard conditions. The adjacent niche must be vacant and belong to the same owner — if it has been sold to someone else, no amount of money moves it. The frame must be demountable: with an upright system the divider can be removed, but a monocoque carcass can only be replaced as a set. And the load path has to be recalculated: remove one divider and the span above goes from 300 to 620, deflection rises more than fourfold, so a cross beam or a thicker shelf is mandatory.
Cost is "two niche prices plus alteration", the alteration covering dismantling, adding beams, touching up finishes and renumbering — about 20%–40% of one niche price — with a two to four week programme that must avoid the Qingming period. Afterwards the cavity is roughly 620 × 300, enough for two urns side by side. But it is no longer a standard niche: fewer buyers on resale, and more room for them to bargain.
Splitting means putting the two urns that were meant to share into two separate niches. It is the least welcome but most stable option.
The real cost is not the niche price but the management fee. Two fees accrue annually, and over twenty years that usually comes to 30%–60% of a niche price; and if the two niches are in different halls, every visit means two stops.
Splitting has one hidden benefit: flexibility. Two independent niches mean a future relocation, a companion interment or a change to a tablet affects only one side. Families with several children should do this sum carefully — two urns in one niche cannot be dealt with if a single child objects.

| | Relocate | Enlarge | Split | |---|---|---|---| | Structural work | None | Yes | None | | Cost | 5%–10% handling | Two niche prices + 20%–40% | Extra niche + fees | | Time | 3–15 working days | 2–4 weeks | Immediately if vacant | | Precondition | A larger niche exists | Adjacent vacant and demountable | A niche is vacant | | After-effect | None | Non-standard, hard to resell | Fees double long term |
My advice: within 20 mm, try relocation first; beyond 40 mm with a vacant neighbour, consider enlarging; with several children who may later want separate arrangements, go straight to splitting.
Ask the operator: if the urn does not fit, what do you do, and what do you charge? A proper columbarium writes it into the contract: one exchange, no handling fee, any difference settled at the price then in force. If it is not written, the risk stays with you.
Ask it more concretely: can the clear width, clear height and opening diagonal of this niche be written into an annex to the contract? A hall willing to write them down has measured; one that will not probably has not.
Q: The urn is already sealed and now will not fit — can it be opened and swapped for a smaller one?
A: Technically yes, but it requires choosing a date, engaging a celebrant and resealing, at extra cost, and it is emotionally hard on the family If relocation is possible, do not open the urn.
Q: After enlarging, is the fee charged for one niche or two?
A: Most halls charge on the originally registered area, so still two. Get written confirmation before the alteration, or you will be arguing about it afterwards.
Q: The niche was bought years ago and never used — can I exchange it for a bigger one now?
A: It depends on whether the contract has an exchange clause. Without one, the hall may refuse or charge a large handling fee — the most common trap in pre-need purchases.

A niche that will not take the urn comes down to a tape measure that was never used at the point of choosing. Relocation is cheapest, enlargement most thorough, splitting most flexible, and none of them is free. In a columbarium the most expensive thing is never the niche price; it is all the remediation after buying the wrong one.