Same hall same batch of cabinets, same door panels, and prices run from thirty thousand to ninety thousand. That is normal in columbarium niches The question families ask most is: "what exactly is the expensive half paying for?"

I break the gap into three parts: position, specification, packaging. The first two are worth money. The third is mostly sales talk.
Position differences have a clear physical basis, driven by three variables.
Eye-level height. A standing sightline naturally settles at 1.4 to 1.6 m, and niches in that band cost the most. Below 1.1 m you bend; above 1.8 m you look up or stand on a stool. In the same row of a hall, the middle three tiers can price at 1.5 to 2 times the top tier.
Daylight and orientation. A niche on the daylight side can read 200 to 400 lux higher than one on the inner side; door panel colour is legible and the urn face does not go dull. But note that direct sun accelerates coating ageing — a west-facing niche is not necessarily a good thing.
Circulation position. A niche on the main aisle has generous standing space but heavy foot traffic; a niche against the wall is quiet but you cannot turn easily There is no absolute good or bad here — it depends how the family uses it.
Stack those three variables and a 2× position spread is reasonable. Beyond 2×, start suspecting that you are being sold a story.
Specification differences are real material cost, and they are the least clearly explained part.
Going from a 0.5 mm aluminium composite door panel to a 1.0 mm solid aluminium panel costs about 30 per cent more; moving from a standard cam lock to a leaf-tumbler cylinder adds 50 to 80 yuan; upgrading the lining from ordinary cloth to low-VOC short pile adds over 100 yuan; changing the shelf from single-fold to double-fold with stiffening raises load capacity from 25 kg to 40 kg.
These differences are visible and touchable in the showroom, and you can ask item by item: "How thick is the door panel? What grade is the lock cylinder? What load does the shelf carry? What is the lining material?" Four questions and the specification gap is basically clear.
The ceiling for specification differences is around 1.5×. Beyond that you are no longer buying material but process complexity — curved door panels, hand-finished timber veneer, custom carving. Those genuinely cost more, but they have little to do with whether a niche works well.
Packaging is the hardest part to identify. There are four common forms.
The "feng shui niche". A master is brought in to declare that this niche "sits true and gathers qi", and the price goes up thirty per cent. The problem is that orientation is set by the building — every niche in the same hall faces the same way.
The "limited release niche". This zone has only three left and will never be opened again. In reality a whole floor is still unopened.
The "celebrity niche". A certain notable is also in this zone. That has no relationship whatsoever to the niche itself.
The "package niche". Niche plus tablet plus pre-need contract bundled, total more than buying separately, but it looks like everything is included.
My judgement on packaging: not one fen more should be paid. The value of a columbarium niche is position and specification, not story.

Three moves, ten minutes.
First, compare horizontally within the same hall. Ask the salesperson: "In the same row, what is the gap between cheapest and dearest, and why?" If no specific reason comes back, the gap is air.
Second, compare vertically at the same position. For the same niche, how much does one specification upgrade add? Once you have that number you know the real unit price of specification.
Third, look at sold niches, not the showroom. The showroom is always the best group. Ask them to open a sold but not yet activated niche, and look at the internal chamber, the door gap, the shelf thickness.
There are traps in the other direction too. A niche priced well below the hall average usually has a reason: next to the toilets, next to the plant room, facing an air outlet, insufficient headroom, or numbered behind a column.
The real problems with those niches are damp and noise. Toilet extract, dehumidifier return air, lift-shaft noise — all concentrate at specific positions. When you visit, stand quietly in front of that niche for three minutes. What you can hear and smell is more accurate than any sales pitch.
Q: Are expensive niches better at holding value?
No. On resale, the buyer looks at position and current condition, and will not pay for the original "feng shui premium". A columbarium niche is not an investment.
Q: With a 3× spread in one hall, can I negotiate?
Position gaps are hard to negotiate; packaging gaps can be. The correct way to negotiate is to strip the package and buy only the niche, not to force down the unit price.
Q: Can a cheap niche be improved through finishing?
Door panels, lining and light fittings can be changed. Position, headroom and daylight cannot. So spend the money on position; specification can be upgraded later.
Q: How do I tell whether a niche is "next to the plant room"?
Look at the plant room location on the floor plan, then check whether there is a service access door behind that niche. Any wall with an access door raises questions about both sound insulation and moisture protection.

With a 3× spread in one hall, up to 2× is position, up to 1× is specification, and the rest is packaging. What a family should do is not hunt for the cheapest, but map every increment of price to a reason that can be stated clearly. A columbarium niche is a thirty-year user experience. A premium nobody can explain will not become reasonable in thirty years.