Family niches are the category most often overbought. Sales will tell you that six cells bought at once lowers the unit price and means you never have to look for a place again. That is not wrong, but the money you save is often eaten back by a decade of vacancy management fees.

Let me put the numbers on the table first, then say how many to buy.
A family niche is not six single cells placed next to each other; it is built as a module. The common approach is a 600 × 560 × 500 mm unit, six assembled into one group, separated internally by two dividers, sharing one large outer door.
What that saves is very concrete: six single cells need five dividers, a six-cell module needs two, saving three dividers and their profiles. Six singles need six doors; the module needs one or two, saving more than half the hardware.
Reflected in price, a six-cell family niche typically runs 70 to 85 per cent of the single-cell unit price. That is the "money saved" part.
The first is vacancy management fees. Most facilities charge per niche. In six years you may use two and still be billed for the other four. Assume 500 yuan per niche per year: four vacant niches over ten years is twenty thousand yuan — frequently more than the discount you gained.
The second is a locked position. Family niches usually must be bought and used as a whole and cannot be split for resale. If the family relocates, or the next generation chooses a different form of interment that group becomes sunk cost.
The third is ceremonial cost. Six cells behind one door are commemorated together, so the offering table has to be longer. Some families find they "cannot tell which is which" and end up building partitions anyway.
I usually ask families to do one simple sum: two for the couple, two for the parents, and the children's generation left out for now. That gives four.
If the elders have clearly asked that the family stay together, four to six cells is reasonable. If it is only the couple, buy a double first and let the children choose separately later — that is more flexible.
One very practical criterion: buy enough family niches to fill this generation. Scarcity in a columbarium is about position, not quantity. Keeping the money and buying adjacent niches when you actually need them is safer than committing to six now.
There are two arrangements for a six-cell module: 3 × 2 and 6 × 1.
3 × 2 is two rows of three. It occupies a nearly square footprint but the upper row has a poor sightline and the lower row requires crouching. 6 × 1 is a single row of six. Every urn sits on the same horizontal line and can be seen at a glance during a visit, but it needs 3.6 m or more of continuous wall.
In a columbarium hall 6 × 1 suits a wall end position; 3 × 2 suits a short wall between columns. Before choosing measure the actual wall length — do not rely on the module dimension on the drawing. Columns and service access panels routinely cut a 6 × 1 into a 4 + 2.

In a six-cell group without partitions, the gap between urns is only 40 to 60 mm and they read visually as one continuous block. With partitions, each takes 20 mm, so six cells consume 100 mm — equivalent to losing one more niche.
My recommendation for family niches is "open above, divided below": keep full height clear between shelves, and use 20 mm vertical dividers between cells. That keeps them distinguishable without chopping the space into fragments. If the niche door is a single sheet of glass, dividers become essential — otherwise from outside you see a row of urns and cannot find your own.
The first: the niche numbers. They must specify zone, row, column and tier — all four levels. "One family group in a certain zone" is not acceptable.
The second: whether it can be split for use. Some contracts allow the six cells to belong to different households; others require a single applicant. This determines whether you can later reserve two for an in-law family.
The third: management fees on vacant cells. Ask whether the vacant period is reduced, for how many years, and from which year full billing applies.
Q: Can a family niche be activated in stages?
Yes, but the contract must state that staged activation carries no extra charge. Some facilities levy an opening fee each time; six activations add up.
Q: Can I buy only four cells of a six-cell family niche?
Most modules are fixed, so four cells require customisation and the unit price ends up higher than six. If you only need four, buy two doubles instead.
Q: Can a family niche be transferred to another family?
It depends on the contract. Most allow whole transfer but not partial transfer, subject to operator consent and a transfer fee.
Q: Can the position of a family niche be changed later?
Within the same hall, usually yes, with a price difference payable. Moving between halls means requeueing. Relocating a six-cell group costs far more than a single cell, so settle this before you buy.
Run through this list before buying a family niche and you avoid ten years of trouble:
1. Are all six niches specified by zone, row, column and tier in the contract? 2. Are the six contiguous in the same row, with no column or service access in between? 3. Are vacancy management fees reduced, and for how many years? 4. Can the family niche be split among different households? 5. Are there still vacant cells adjacent, allowing future expansion?
If you cannot answer any one of the five, do not sign yet. A family niche is a large one-off outlay; settle these five questions and the niches will not become a burden.

A family niche saves dividers, doors and hardware. It does not save the vacancy management fees or the loss of flexibility. My advice is blunt: buy the number this generation can fill, not the number you might possibly need. Niches can always be bought later. Money tied up in them cannot move.