The first principle of a columbarium palette is "nobody should remember the colour." Walking out, what a person should recall is the light, the quiet, a particular position — not "that hall was green." Once a colour stands out, the dignity disperses.

Use a low-saturation warm grey, lightness 70–80, chroma below 5. On a colour fan that range looks drab; on a wall it is exactly right — large areas amplify chroma, so the 5 you chose will look like 15 once it is up.
Use cool grey with caution. A columbarium's mood is already quiet; another layer of cool grey reads as gloomy. A warm grey with a touch of yellow or ochre is far more comfortable to be in.
Pure white reflects over 85%, and over large areas in a columbarium it tires the eyes, while showing every mark. If you want white, use an off-white at lightness 88.
Pure black on large wall areas is out. It absorbs light, makes an aisle look fathomless, and older visitors feel unsafe walking through. For dark tones, use a deep grey at lightness 25 or a deep brown.
High-saturation red has no place in columbarium public areas. In a funerary context red points in complicated directions; unless ritual explicitly requires it, do not use it.
Timber is the only material colour that provides warmth in a columbarium. Use it at 20–30% concentrated low down: handrails, door panels counters, shrine cabinets.
Do not put timber high up. The upper part of a columbarium should be light and recede; timber there presses down. Nor should timber cover a whole wall — a twenty-metre timber wall looks heavy under lighting.
Gold is the accent in a columbarium. One place is enough: before the Buddha on the primary sign, or at the entrance portal. Above 5% and it turns from dignified to vulgar.
Use gold in detail rather than on planes: lines frames lettering A columbarium with a whole gold-leaf wall will be regretted within five years — gold leaf oxidises and darkens, and cannot be touched up.
Floor lightness 10–15 below the walls reads as "settled." Too small a difference and the space floats; too large and the floor looks like a pit.
Use mid-tone matte stone or homogeneous tile, with the upper wall pale and the lower wall darker, producing a "heavy below, light above" order That order matches a standing viewpoint, and walking in feels grounded.
One practical detail: a colour called "warm grey 03" can shift half a step red when the paint manufacturer changes batch Columbarium wall areas are large, so order the full quantity at once at 0.35 kg per square metre, plus 10%. If you top up mid-job and repaint, a faint band appears at the joint, and lighting brings it out.

The same warm grey looks creamy under 3000 K, only true under 4000 K, and greenish under 5000 K.
Use 4000 K for main lighting in a columbarium, with 3000 K locally at the Buddha Choose colours on site under the actual lighting, never from a fan under daylight — that is the most common cause of colour failure in columbaria.
Make a 1 m² sample panel, paint it on a wall of the same orientation and look at it for three days: morning, noon, evening, and after the lights go on.
The light environment in a columbarium changes four times a day. Decide from a single morning look and by afternoon it will seem a completely different colour. A sample panel costs a few hundred; repainting a wrong choice costs tens of thousands.
Niche door panels are the largest "colour surface" in a columbarium. Panels in the same area must come from the same batch, because powder coating varies between batches even at an identical colour code.
If you must split, split by whole wall, and never mix batches within one sightline. The ugliest thing you can see in a columbarium is one wall carrying three shades of the "same" colour.
Q: Can a columbarium use blue?
A: A very low-saturation grey-blue (chroma below 3) is possible, but only locally, for instance as a shrine backdrop. Large areas of blue make the space feel cold.
Q: Will dark walls feel oppressive?
A: Yes. In a columbarium, restrict dark tones to a dado up to 1.2 m and keep the upper wall pale.
Q: Can colours be changed after sign-off?
A: Walls can be repainted; floors and panels cannot. So sign off floor and panel samples two months in advance and allow time for mock-ups.

A columbarium colour system: warm grey at lightness 70–80, timber at 20–30%, gold under 5%, floor 10–15 darker than walls, main lighting at 4000 K, sample panels viewed on site for three days, panels from a single batch. The dignity of a columbarium is not built out of any particular colour — it comes from no colour stepping forward. Achieve that and the colour is right.