These are the questions that come up in almost every quotation. If yours is not here, send it with your hall plan and we will answer it in writing.
There is no single national standard. The common single-niche internal size is 400 × 400 × 350 mm, which suits most urns up to about 300 mm high. Wider or taller cells are used for oversized or companion urns, and the size should be set from the urn first rather than from the drawing.
Galvanised steel, aluminium alloy and stainless steel for the carcass; powder-coated steel, aluminium or glazed crystal for the door front. Stainless 304 is the safer default for coastal or high-humidity halls; galvanised with powder coating is the common choice where budget dominates and the climate is dry.
A 100 m² hall typically holds 180–240 single niches with a 1.5 m main aisle and 1.2 m secondary aisles. Capacity is driven by clear height and column spacing as much as by floor area.
Minimum order is quoted per project or per wall module rather than by the piece. For a first order we usually recommend one wall so that installation tolerances and packing can be checked before scaling up.
Production runs 30–60 working days after drawing approval, at a factory capacity of 50,000 pieces per month. Sea freight time depends on destination and is quoted separately.
Yes. Niche size, tier count, door colour number plate style and the frame profile can all be adjusted, and we work from your hall drawing. Where a wall must match an existing supplier, send the internal size, a photo of the door front and a colour reference.
We provide installation drawings and a hardware schedule with every shipment, and can send a supervisor for large projects. Most halls are installed by the local contractor from our drawings.
Panels are packed in matched sets per wall, with corner protection, and the container loading plan is agreed with the drawing package so that the wall goes up in the intended order.
Send it to us with your hall plan, or read the technical articles for the design reasoning behind these numbers.