Authenticity Guaranteed

Columbarium Design Knowledge & Industry Insights

Clearance Behind a Niche Rack: 50 mm Is the Floor
Clearance Behind a Niche Rack: 50 mm Is the Floor
Published: 2026-11-05
10
Whether the back of a niche rack touches the wall looks like a construction detail. Flush against the wall saves 5 cm, and across a row of twenty niches that is a metre — any owner would take it. But that 5 cm buys back panels that go damp, mould patches, insects, and no way to service anything late ...
How High Should a Niche Skirting Be? The Case for 80–100 mm
How High Should a Niche Skirting Be? The Case for 80–100 mm
Published: 2026-11-05
9
The skirting is the strip at the very bottom of a columbarium, and many people assume it is decorative edge trim. In fact it does four jobs at once: it stops mop water, conceals an uneven floor, protects the bottom edge of the door panel and leaves an inspection gap at the base. Too low and it colle ...
The Urn Does Not Fit: Relocate, Enlarge, or Split?
The Urn Does Not Fit: Relocate, Enlarge, or Split?
Published: 2026-11-05
9
You buy the urn, carry it to the hall and only then discover it will not go in. This happens dozens of times a year The usual cause is not an oversized urn but that nobody measured the cavity when the niche was chosen. The niche is already bought and there are only three routes: relocate, enlarge, o ...
Can One Niche Hold Two Urns? Measure Width and Height First
Can One Niche Hold Two Urns? Measure Width and Height First
Published: 2026-11-05
10
Two urns in one niche saves the price of a second place, and it is one of the questions families ask most often. The answer is not "yes" or "no" but three numbers: clear width, clear height clear depth Meet all three and one niche two urns works; fail one and the consequences of ...
What Material for a Niche Door Gasket?
What Material for a Niche Door Gasket?
Published: 2026-11-04
10
A gasket is a few yuan of rubber running around a niche door, and it decides whether dust gets in and whether the door closes properly. EPDM silicone and PVC differ threefold in price and fivefold in life. Fit the wrong material and in two years the strip has hardened, the door no longer seals, and ...
Should a Niche Have Breathing Holes?
Should a Niche Have Breathing Holes?
Published: 2026-11-04
10
Once a gasket is fitted, a niche looks sealed. In practice it is not — change the temperature and a pressure difference appears, and moisture squeezes in through any gap it can find Two or three 5 mm holes make condensation less likely than full sealing does. It is counter-intuitive, but the mechani ...
Managing Niche Keys: One Lock One Key, or Master-Keyed?
Managing Niche Keys: One Lock One Key, or Master-Keyed?
Published: 2026-11-04
9
A four-hundred-niche hall has four hundred keys Keep them all separate and management costs soar and families lose keys constantly; master-key the lot and one key opens the building, which is security zero. This is purely a management question, but the answer determines how the locks are bought.Thre ...
Niche Locks: Cam Lock or Deadbolt Latch?
Niche Locks: Cam Lock or Deadbolt Latch?
Published: 2026-11-04
12
The lock on a niche is the one lock in the family's life that gets used a few times in twenty years It does not need to resist picking, but it must meet three conditions: it locks when the door closes, the key never jams, and a spare can still be cut in twenty years. Cam locks and deadbolt latch ...
Do Niches Need Seismic Measures, and How?
Do Niches Need Seismic Measures, and How?
Published: 2026-11-04
10
A row of niches looks like a bank of static cabinets, and in an earthquake it is one of the more dangerous places in the building: tall racks, heavy self-weight, a centre of gravity high up, and irreplaceable contents. Seismic design here is not about keeping the rack upright — it is about keeping t ...
Aluminium Alloys: 6063 Versus 6061
Aluminium Alloys: 6063 Versus 6061
Published: 2026-11-04
10
A quotation reads "aluminium alloy profile" and rarely names the alloy. But 6063 and 6061 are different materials: one extrudes beautifully, the other is stronger. Use 6063 for the uprights of a columbarium and they will not necessarily fail — there is simply not enough safety margin.Why 6 ...
cache
Processed in 0.005202 Second.